Re: Apple //c boot disks needed (london, UK)

["Peter Ibbotson" <spambox@ibbotson.demon.co.uk>]

"Phil Beesley" <pb14@le.ac.uk> wrote in message
pb14-061220021442573768@mac180.cc.le.ac.uk">news:pb14-061220021442573768@mac180.cc.le.ac.uk...
> In article <aspvjf$rpi$1$830fa78d@news.demon.co.uk>, Peter Ibbotson
> <spambox@ibbotson.demon.co.uk> wrote:
>
> > <noone@nowhere.net> wrote in message
3DEF88C6.6060005@nowhere.net">news:3DEF88C6.6060005@nowhere.net...
> > > with it.  Hook up a null modem cable between the IIc and PC and send
DOS
> > > using IIc serial port 'terminal' firmware and built in comm software
on
> >
> >
> > Sending DOS is the tricky bit... Does anyone have a step by step guide
to
> > this? I'd assume that sending over HIMEM -> $BFFF $300->$3FF plus the
non
> > monitor zero page stuff, followed by a warm boot would work.
>
> According to the FAQ, you should be OK just using ADT to create a boot
> disk. However if you're feeling less masochistic, mail me off list and
> I'll post a couple of disks to you.
>
> Phil

Ahh... Just spotted the line about sending over a DOS33 dump file (It wasn't
in the version of ADT I downloaded) and have now downloaded a copy. I'll see
how I get on, I probably won't need to take up you on a copy as the
instructions seem fairly clear and I think I can manage to persuade the //c
serial port to go to the right baud rates.
Looks like a case of read all the FAQ first.

--
Work peteri@lakeview.co.uk.plugh.org | remove magic word .org to reply
Home peter@ibbotson.co.uk.plugh.org  | I own the domain but theres no MX