Re: Mini-Assembler on Apple II+?

["Redskull" <redskulldc@yahoo.com.au>]

"Bryan Parkoff" <BParkoff@satx.rr.com> wrote in message
Kj.dnfAMEtqLN0SgXTWQlg@News.GigaNews.Com">news:Kj.dnfAMEtqLN0SgXTWQlg@News.GigaNews.Com...
> Mini-Assembler on Apple II+?
>
>     I did review Apple II Reference.  It shows that Mini-Assembler is not
> available on Apple II+.  Why Mni-Assembler is printed in Apple II
Reference
> that is supposed to exist for Apple //e and Apple //c?  Please advise.
>
> Bryan Parkoff
> BParkoff@satx.rr.com
>

2C AND 2e (ENHANCED) have the mini assembler back in the roms.
Type !<ret> from the monitor prompt.
If the prompt changes to a !, then you are in the mini-assembler.

If you have a 2+ with 64k you can always load integer basic, switch
to INT from FP,
jump to the monitor, then F666g <ret> to enter the monitor.

Make sure your INTBASIC file on your Dos3.3 is 50 sectors long,
the smaller, later version does not have the old monitor rom in it.

Red