Re: General call for info on Transwarp GS

["Liam Busey" <buseyl@yahoo.com>]

"Bart" <you@somehost.somedomain> wrote in message
news:xqis9.925$hH1.82976@news.uswest.net...
> I am attempting to bump speed on my TWGS. Currently I have the correct
GALs
> and a 14MHz 816 on the board, but the best I seem to get is 6mhz.  I have
> tried a range of crystal oscillators but the only ones that do not produce
a
> AE 503 error screen is with crystals around 25MHz  ie, 25.00 or 25.13
which
> are the two I have, these produce speeds of 6.0 or 6.25).
> My question is simple:  For those who have a TranswarpGS: Could you please
> post 1 the speed of your TWGS, and 2 the frequency of the crystal
oscillator
> you are using to achieve that speed?  The EXACT frequency that is.
> My Thanks
>

I have 2 TWGS. One at 6.25 MHz with a 25 MHz crystal and a second at 7 MHz
with a 28MHz crystal. I was running the 7MHz TWGS at 12MHZ with a 48MHz
crystal (very snappy) for a while but the machine was a bit too unstable for
my taste. I plan to upgrade the cache with faster RAM and try again but
haven't quite gotten around to it yet. It's my understanding that the
6.25MHz TWGS were some of the first produced so their cache RAM may have
been pushed closer to the limit than later models. This may be your problem.

- Liam