Re: Central Point software Board ??

[Wayne Stewart <waynes@intergate.ca>]

Louis Cornelio wrote:
> 
> In article <3d67a088_3@news3.prserv.net>, "Tom Zuchowski"
> <tzuchow@attglobal.net> wrote:
> 
> > I got your card jpg, Louis. It looks like perhaps Wayne had the right
> > info
> > for you. The "Laser" UDC cards I have are much smaller and use
> > surface-mount
> > components, and have permanently attached cables.
> 
> Well I got to test it out & it works great. I think it did want the 3.5
> drive before the 5.25, but everything works!!
> 
> well, everything except the EJECT button :(

 I believe the later firmware allowed the eject button to work for the 
drive in the D1 position. 

Another solution is to just hook the eject button directly up to the 
eject motor. It works well except you'd have to be careful hot to push 
the button while the disk is reading and writing. I suspect it wouldn't 
harm the drive but I've never actually tried it. 
It's fairly easy to make this mod in a reversible manner. 

	Wayne