[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Installing AE Z80c card into a IIc?
- Subject: Re: Installing AE Z80c card into a IIc?
- From: Wayne Stewart <waynes@intergate.ca>
- Date: Wed, 03 Apr 2002 19:41:16 -0800
- Newsgroups: comp.sys.apple2
- Organization: Posted via Supernews, http://www.supernews.com
- References: <n_Bq8.184442$uA5.150506@rwcrnsc51.ops.asp.att.net>
- Xref: archiver1.google.com comp.sys.apple2:18627
Ernest wrote:
>
> I have a Z80 card for my IIc but I don't know where to connect the black
> clip. In fact, I'm not sure where to plug the card itself either. It's an AE
> Z80c card.
>
> Do I remove the cpu from the IIc and plug this card into the cpu socket, and
> then plug the 6502 chip into the card? Where does the black wire go?
>
> Does anyone have a copy of the user manual and CP/M disk for this card?
I do have the Z-RAM II manual, don't know if it's the same as the Z80c.
In the Z-RAM II you remove the processor and MMU from the IIc and
relocate
them to the Z-RAM II. The Z-RAM II plugs into the 65C02 and MMUs
sockets.
The black wire then clips onto pin 2 of the TMG chip.
I guess I should do a pdf of the Z-RAM II manual and get it on my website.
Wayne