Re: Installing AE Z80c card into a IIc?

["Ernest" <ernestls@attbi.NOSPAM.com>]

"Wayne Stewart" <waynes@intergate.ca> wrote in message
3CABCB57.46CDD08A@intergate.ca">news:3CABCB57.46CDD08A@intergate.ca...
> Ernest wrote:
> >
> > I have a Z80 card for my IIc but I don't know where to connect the black
> > clip. In fact, I'm not sure where to plug the card itself either.  It's
an AE
> > Z80c card.
> >
> > Do I remove the cpu from the IIc and plug this card into the cpu socket,
and
> > then plug the 6502 chip into the card? Where does the black wire go?
> >
> > Does anyone have a copy of the user manual and CP/M disk for this card?
>
> I do have the Z-RAM II manual, don't know if it's the same as the Z80c.
> In the Z-RAM II you remove the processor and MMU from the IIc and
> relocate
> them to the Z-RAM II. The Z-RAM II plugs into the 65C02 and MMUs
> sockets.
> The black wire then clips onto pin 2 of the TMG chip.
> I guess I should do a pdf of the Z-RAM II manual and get it on my website.
>
> Wayne

What is an MMU and TMG chip. I'm sure that I'll slap my forehead when you
tell me.
Thanks for the info, though.

BTW, do you still have any of those Apple II clones that I saw a while back?

Thanks.

E.
--
Web Page: http://12.228.5.66