Re: Info needed on apple lazerwriter?? IIGS??

[salfter@salfter.dyndns.org (Scott Alfter)]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

In article <10867-3C3D34DC-105@storefull-228.iap.bryant.webtv.net>,
John Chism <MagicChiz@webtv.net> wrote:
>If anyone can help me with some info on a apple lazerwriter.  Can this
>be hooked up and run by my IIGS?

Yes, by LocalTalk or RS-232.

>Is there any way to test the print quailty?

Install the LaserWriter driver and print something.

>What settings will work with Appleworks and or Print shop etc?

Most 8-bit programs were written long before laser printers became
commonplace.  There's an Imagewriter emulator that can be loaded into the
LaserWriter (I think the LaserWriter driver for the IIGS does this) that
will enable you to print from any program that supports the Imagewriter
(read: nearly any 8-bit program).  Graphics quality will be limited to
160x144 dpi, which is the Imagewriter's maximum resolution.  I think text
will print at the LaserWriter's native resolution (300 dpi), but I'm not
100% sure of that.

>Any help would be great, please e-mail me at 

This is Usenet...you ask a question here, you get your answer here.

  _/_
 / v \  Scott Alfter (salfter@salfter.dyndns.org)
(IIGS(  http://salfter.dyndns.org
 \_^_/  rm -rf /bin/laden
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE8PdTwVgTKos01OwkRAgtOAJ9UHMxyqhTWXCGwxGAsa+n/Bhr2ygCeOZNA
WAeajBLhs5R+/Zxa294AVT4=
=nIGQ
-----END PGP SIGNATURE-----