[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need Info About A2 Cards/Board

Subject: Re: Need Info About A2 Cards/Board
From: mjmahon@aol.com (Michael J. Mahon)
Date: 30 Nov 2001 05:29:26 GMT
Newsgroups: comp.sys.apple2
Organization: AOL http://www.aol.com
References: <18360-3C06D0DD-12@storefull-287.iap.bryant.webtv.net>
Xref: archiver1.google.com comp.sys.apple2:15299

sirarlias wrote:

>The ROM card does go into Monitor. I don't know much about messing
>around in there. so it will make a nice decoration in slot 3 until I
>learn more.

Actually, it usually goes in slot 0, where its toggle switch fits nicely
through the rear cutout of a ][ or ][+.  When the switch handle is down,
the BASIC ROMs on the card are disabled.

-michael

 Email:  mjmahon@aol.com
 Home page:  http://members.aol.com/MJMahon/

References:
- Re: Need Info About A2 Cards/Board
  - From: sirarlias@webtv.net

Prev by Date: Microsci floppy disk controller
Next by Date: Re: C= Analog RGB on IIGS?
Previous by thread: Re: Need Info About A2 Cards/Board
Next by thread: Re: Need Info About A2 Cards/Board
Index(es):
- Date
- Thread