Re: IIgs doesn't see the SCSI harddrive.........

["william strutts" <wrstrutts1@nospam.home.com>]

"Courtney Thomas" <ccthomas@flash.net> wrote in message
3B916F5F.6EA2D28F@flash.net">news:3B916F5F.6EA2D28F@flash.net...
> Thanks for your attention again.
>
> I contacted Seagate and you're right, it won't provide term_pwr. And
> since the Apple High Speed card won't either, apparently this is an
> unworkable duo.
>
> Unless,.....
>
> I alter the SCSI card, which I'd prefer avoiding, or.........
>
> The drive [ST32550WC] has an adapter [KEY Circuit 0299 - TRANS
> INTERNATIONAL 880-0051 REV B00] with some jumper pins on it but I am
> ignorant as to where I might find jumper info. But Seagate indicated
> that this was a possible source of term_pwr.
>
> Anyone got any information on these adapter people ?
>
> Gratefully,
>
> Courtney
>
>
>
>
Some drive cases supply its own termination power. I have a
Nu Design case which has built in termination in the case. You
might want to check your SCSI enclosure for such things.

--
--
William R. Strutts - wrstrutts1@nospam.home.com - Whatever!

C'est moi!  http://www.facelink.com/wrstrutts

Just hacking away...

Remove nospam to reply.