[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ADT issue
OK, I looked it up. The IIc is missing the RTS and CTS signals. So
cross pins 4&5 on the 25 pin plug.
If you have a break-out box, this will be easy using the jumpers
provided, if not, a small bit of wire wrapped around the two adjascent
pins may be sufficient. :) (use a staple or single copper strand from
another wire)
Thankx,
Ed
eeastmanNO@SPAMapple2.com
noone@nowhere.net wrote:
> The IIc does not have all the handshaking signals that a standard com port would have, so there may be
> more lines to be crossed to force the IBM side into communicating.