[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Setting the jumper on the Super Serial Card

Subject: Setting the jumper on the Super Serial Card
From: olcott <olcott@qwest.net>
Date: Tue, 30 Jan 2001 14:31:40 -0600
Newsgroups: comp.sys.apple2, comp.sys.apple2.programmer
Xref: supernews.google.com comp.sys.apple2:5523 comp.sys.apple2.programmer:456

I don't see any jumper to set. I can
find the dip switches easily enough,
but, I can't find a jumper.

*** NOTE *** I must set this
jumper to "terminal" rather than
"modem" so that I can use this
card with ADT.

Follow-Ups:
- Re: Setting the jumper on the Super Serial Card
  - From: Rubywand <rubywand@swbell.net>
- Re: Setting the jumper on the Super Serial Card
  - From: Roy and/or Janet Miller <millers@inetnebr.com>
- Re: Setting the jumper on the Super Serial Card
  - From: mattack@vax.area.com (Matt Ackeret)
- Re: Setting the jumper on the Super Serial Card
  - From: dalloff@gcfn.org (Dave Althoff Jr)

Prev by Date: Re: More ZipGS Upgrade Woes!!
Next by Date: Re: Setting baud rate in ii GS Control Panel
Previous by thread: Looking for Apple II game Morloc's Tower
Next by thread: Re: Setting the jumper on the Super Serial Card
Index(es):
- Date
- Thread