Re: ID a board and help too Please

[Rubywand <rubywand@swbell.net>]

Bart writes ...
> 
> I just got another junked //e today with some cool cards: a Epson printer
> card with synoptics type cable and........
> Heres my problem child:
> 
> A board marked PHASOR  APPLIED ENGINEERING C 1989.  It has 2 RCA jacks a
> buncha chips and to POTS on the uper left.  Unfortunately one pot looks
> damaged  (the right one)  Question is this a sound card of some kind?

     Yes.


> where
> do I get specs?  Any idea what the range ont he pots are so I can either
> replace or wire in a resistor near the middle?
 ....

     Don't know the value of the damaged pot. You could remove the pot and try
measuring across the end tabs or from the middle tab to either end tab at max R
setting.

     There is a Phasor mini-manual included in the FAQs as a Resource file on
Ground and other Apple II FAQs sites:

http://home.swbell.net/rubywand/R013PHASOR.htm
ftp://ground.ecn.uiowa.edu/apple2/Faqs/R013PHASOR.TXT
http://www.grin.net/~cturley/A2.FAQs.and.INFO/CSA2.FAQs/R013PHASOR.TXT
ftp://tarnover.dyndns.org/Tarnover/FAQs.and.Info/A2.Csa2.FAQs/R013PHASOR.TXT



Rubywand