[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Difference between 'disk II' and 'disk III' floppy!
- Subject: Re: Difference between 'disk II' and 'disk III' floppy!
- From: dempson@actrix.gen.nz (David Empson)
- Date: 2000/03/23
- Newsgroups: comp.sys.apple2
- Organization: Empsoft
- References: <AMkC4.21636$6b1.389487@news1.online.no>
- User-agent: MacSOUP/2.4.2
Deacon Blue <scavenger@apexmail.com> wrote:
> I have a Apple /// system with a beige,external 5.25" floppy drive with
> designation "disk III". Is this drive identical to the 'disk II', and will
> it work as direct replacement for a 'disk II' on a II /IIe system?
No. The mechanism is the same, but the control board ("Analog board")
used in the drives are different, and they have a different connector
(the Disk /// has more pins).
If you had a faulty Disk ][ which had a functional Analog card, you
might be able to swap the mechanisms over.
--
David Empson
dempson@actrix.gen.nz
Snail mail: P O Box 27-103, Wellington, New Zealand