Re: Getting Appletalk going on GS

[Robert Jensen <bob_jensen@jhuapl.edu>]

In article <1dqos71.192uvln149yw3qN@dempson.actrix.gen.nz> David Empson,
dempson@actrix.gen.nz writes:
>If you have a ROM 1 IIgs, you need to set either slot 1 or 2 to "Your
>Card", then set slot 7 to "AppleTalk".  The AppleTalk firmware will then
>use the port corresponding to the slot which is set to "Your Card".

Indeed, this was my problem. Thanks to all who gave advice. I have a ROM 1
machine could select Appletalk on slot 7 after setting slot 1 to "Your
Card."
Everything works.

Thanks again to all.
=========================================================
Bob Jensen
bob_jensen@jhuapl.edu