Re: New Apple IIc Owner Needs Help

[hydros_by_hall@csi.com (Richard A. Hall)]

pinouts

                          7     1
                       6           2
                         5       3
                               4
1 not connected
2,3 signal ground
4 shield ground
5,6 +15v DC
7 not connected
Pinouts taken from the Apple IIc Technical Reference Manual.
The input voltage can be from 9V to 20VDC.
It is possible to run the IIc crt from 12 volts also. The internal crt power
supply converts the house ac to 12 volts dc. With the schematic one can plug
12 volts in and have a IIc that will run off your car battery,


On 23 Aug 1998 03:23:15 GMT, supertimer@aol.com (Supertimer) wrote:

>Frederic Jean <fredjean@odyssee.net> wrote:
>
>>I just bought an Apple IIc in a garage sale today, and I'm starting my
>>Apple II education. The first thing that I need is information on the
>>power supply : the computer I got did not have a power cord/power
>>supply. Are they hard to find ? Were they made specifically for this
>>machine, or is it something I can get in any electronics shop ? Thanks
>>for your help.
>
>The unit does not need a switching power supply.  It just needs
>a 12V-15V DC power source (regulator built in...see, the IIc was
>designed to easily run from a car cigarette lighter or a battery
>pack).
>
>I don't have the pinout to the IIc power connector.  You'll need
>it to properly connect + and - leads.

Apple II educational software http://members.xoom.com/AV_Systems