Re: Ramfast rev.D and Tower case

[at217@chebucto.ns.ca (Michael Hackett)]

rubywand@swbell.net wrote:
>      Of course, you could always pick this time to invest in a Zip drive! 
> The Zip, sitting on top of your case, could run its 25-pin cable to the 
> RamFAST and there would be a good excuse for having a regular, gross, 
> 25-->50 cable go from the Zip back into the case to your other SCSI 
> stuff.

Naaaa! Just get an internal Zip, like I just did! The internal is
actually quite nice. It can fit in a 3.5" floppy bay, and if you don't
have any available, the drive comes mounted in a bracket for putting it 
in a 5.25" bay. Installation was a snap, and you can set the ID to
anything you want, not just 5 or 6 like the external. I found the
external's case rather flimsy as well, so you avoid that problem and
it's non-spec 25-25 pin SCSI cable. Granted, you can't move an internal
between machines as easily, but depending on your needs this may not be
a consideration.