Re: IC tester card

[Michael Mahon <mahon@cup.hp.com>]

Patrick Schaefer wrote:
> 
> 
> >It also has a 20-pin header, no doubt to connect to an IC test
> >socket.  Does anyone have info on the wiring from this header to
> >the presumed socket?
> As far as I remember it is an 1:1 wiring.
>   1 * v * 20
>   2 *   * 19
>  ...
>  10 *---* 11

Thanks for the info!  Which pin of the 20-pin header is pin 1?
 
> The software is on disk, the disk is a little bit copy-protected,
> (copy II plus will do it). The card can test 74-TTL, 74LS-TTL and
> 40xx/45xx CMOS devices. There is also an autodetect feature, if you
> dont know the model number, the card will tell you (nice for
> identifying chips on the Accelerator board).
> I'll try do create a .DSK image file of the disk and mail it
> to you, but it will take one or two month until I'll get to do this.

Thanks, Patrick, I really appreciate it!   ;-)

-michael

===============================================================
This is my personal opinion, and does not in any way represent
the position of my employer, etc...