[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Zip- GS Slot Settings

Subject: Zip- GS Slot Settings
From: Daniel Webster <dwebster@monmouth.com>
Date: 1996/08/18
Newsgroups: comp.sys.apple2
Organization: Monmouth Internet
References: <Pine.SOL.3.91.960717235820.12237B-100000@moose> <4sld4m$8bm@nyx10.cs.du.edu> <dempson-2107960056110001@dempson.actrix.gen.nz>

I have a Zip GS 9/16.  I am using the GS on an Appletalk network, so I
had to give up slot 7.  I have my Apple High Speed SCSI card in slot 6. 
When the system boots up the ZIP slot settings are SLOW for slot 6
(Default).  No matter how I set that slot (using the Zip CDA, the FTA
CDA or the Control Panel) the slot always resets to the SLOW setting for
slot 6. 
 
Any ideas on how to get slot 6 to stay in the FAST setting?

Follow-Ups:
- Re: Zip- GS Slot Settings
  - From: spec@vax2.concordia.ca (Mitchell Spector)
- Re: Zip- GS Slot Settings
  - From: nathan@visi.com (Nathan Mates)
- Re: Zip- GS Slot Settings
  - From: wbaguhn@nyx10.cs.du.edu (Will Baguhn)

References:
- ZipGS more stable with slower SRAMS?
  - From: Paul Schultz <pschultz@med.wayne.edu>
- Re: ZipGS more stable with slower SRAMS?
  - From: wbaguhn@nyx10.cs.du.edu (Will Baguhn)
- Re: ZipGS more stable with slower SRAMS?
  - From: dempson@actrix.gen.nz (David Empson)

Prev by Date: Melbourne House games now free for distribution
Next by Date: Re: Zip- GS Slot Settings
Previous by thread: Re: ZipGS more stable with slower SRAMS?
Next by thread: Re: Zip- GS Slot Settings
Index(es):
- Date
- Thread