Re: 8 Speaker sound card

[mquattro@chat.carleton.ca (Michael Quattrocchi)]

Glynne Tolar (gtolar@blkbox.com) wrote:
> $50 does seem high to me but at this low of a run it is pobibly right.
> Now as for $1.50, are you expecting just a overlay?  For $50 I'd expect a 
> 2 sideed board, drilled, plaited holes, if you can do that for $1.50 go 
> into business for yourself.  If you have even tried to make your own 2 

the compexity of this project doesn't seem to warrant a double sided board;
although for $50, i'd sure expect it.

> sided board you would know the pain it is!  Also good luck etching a 
> board with correct card edge fingers!  By your post I'd suspect you've 
> done none of this.

I have, in fact, done the above. I also have the file, I believe, that
this project was based on. And if this project is what it does appear
to be, not to knock a new a2 project or anything, $50 is a bit steep.
If we can't call a spade a spade, then there's something wrong.

----------------------------------------------------------------------
Michael Quattrocchi -- "resistance is futile..." 
Webslinger's Page : http://chat.carleton.ca/~mquattro
----------------------------------------------------------------------