Re: CMS card and write protect

[jblaby@news.cyberstore.ca (John Blaby)]

On 12 Jul 1994 16:27:42 GMT, Brian Ballweber (ballweb@CSOS.ORST.EDU) wrote:
  > Jack Countryman IAC (jcountry@IDEANET.DOE.STATE.IN.US) wrote:


  > : According to the CMS manual, page D3, the six sets of eight pairs of jumpers 
  > : (u1....u6) are for the following purpose:
  > :     
  > [jumper info cut]

  > Just as a side note, you should check the rom version on the card also,
  > my CMS SCSI II card has had three different rom upgrades and the jumpers did
  > different things with each one...
  >  
  > - Brian

Thanks to those that have posted/mailed info so far. I will forward
this on to my friend. 

BTW, the drive is NOT a CMS drive. It is a Seagate ST 225N. This setup
apparantly worked on a GS at one time. It was configured up to share
the drive with a Mac though.

Thanks again.....
	John

--
Fisherman   ;,//;,    ,;/     |     THE APPLE EXPERIENCE BBS
       .   o:::::::;;///      |          604-596-7398
          >::::::::;;\\\      |       Surrey, BC, Canada
            ''\\\\\'" ';\     |  Internet: jblaby@cyberstore.ca