[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AppleTalk on //c

Subject: Re: AppleTalk on //c
From: zcaa1122@rpool3.rus.uni-stuttgart.de (Wulf Hofbauer)
Date: 4 May 1994 17:34:02 GMT
Newsgroups: comp.sys.apple2
Organization: Comp.Center (RUS), U of Stuttgart, FRG
References: <767333547-0-8485@chop.isca.uiowa.edu> <Rq1OD9q.jbastin@delphi.com> <Cp0L8o.Eqr@actrix.gen.nz>

In article <Cp0L8o.Eqr@actrix.gen.nz>,
David Empson <dempson@actrix.gen.nz> wrote:
>When Apple added the AppleTalk firmware to the IIc, they were planning
>on implementing it via an external box which plugged into the printer
>port of the IIc.

If I'm not completely off, the interface was designed to be a smartport
device and would thus be attached to the external disk connector.

- Wulf

-- 
 ______________________________________________________
|                                                      |
| Wulf Hofbauer | zcaa1122@rpool1.rus.uni-stuttgart.de |
|                                                      |

References:
- AppleTalk on //c
  - From: Yua CaVan <Twerp@chop.isca.uiowa.edu>
- Re: AppleTalk on //c
  - From: John Bastin <jbastin@delphi.com>
- Re: AppleTalk on //c
  - From: dempson@actrix.gen.nz (David Empson)

Prev by Date: Re: Will someone please send me STM
Next by Date: Re: Looking for SmartPort info
Previous by thread: Re: AppleTalk on //c
Next by thread: Intrec info
Index(es):
- Date
- Thread