[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Help with ZIP/GSX STDFile crashes
- Subject: Re: Help with ZIP/GSX STDFile crashes
- From: dempson@actrix.gen.nz (David Empson)
- Date: Tue, 26 Apr 1994 12:14:27 GMT
- Newsgroups: comp.sys.apple2
- Organization: Actrix Information Exchange
- References: <2p99q8$f35@charm.magnus.acs.ohio-state.edu> <2p9av8$e1i@paris.ics.uci.edu> <2p9bov$fav@charm.magnus.acs.ohio-state.edu>
In article <2p9bov$fav@charm.magnus.acs.ohio-state.edu>,
Petar E Puskarich <ppuskari@magnus.acs.ohio-state.edu> wrote:
>
> These are my dip settings.
>
> Actually, I a running at 8.31 mhz since the board came with a 33.33333
> mhz crystal installed and also a 7mhz rated cpu.
>
> But that shouldn't make ALOT of difference since this is a rather
> predictable crash.(I can do everything but open a file or folder
> in a STDFileDialog)
Have you tried disabling the ZIP? Turn off the IIgs, set Switch 1-6
to OFF, then power up again.
It is possible that the problem is nothing to do with the ZIP - try
booting from a freshly created system disk, for example.
--
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand