[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RAMFast help?

Subject: Re: RAMFast help?
From: max@texsys.com (Max Heffler)
Date: Sun, 10 Apr 1994 03:27:15 GMT
Newsgroups: comp.sys.apple2
Organization: Texas Systems
References: <goo.765695139@cwis> <2o0gjq$ign@nz12.rz.uni-karlsruhe.de> <fmlinCnx8EH.CBE@netcom.com>

In <fmlinCnx8EH.CBE@netcom.com> fmlin@netcom.com (Frank M. Lin) writes:

>I have a similar problem too.  I used to have a Maxtor LXT-213-SY, which
>works perfectly with my 3.0.1e RF.  I recently switched to a Maxtor
>XT-8760-S, I'm have lots of minor problems.  Hitting error $0C every

I have been running a Maxtor 8760-S for years; however, I drive Drew
crazy by having to send my board in until he replaced it with one that
didn;t have the $0C errors.  Things have been fine for quite a few years
now...
-- 
Max Heffler, Senior Systems Engineer         home: max@texsys.com

References:
- RAMFast help?
  - From: goo@cwis.unomaha.edu (Kent Radek)
- Re: RAMFast help?
  - From: voss@i40s16.ira.uka.de (Stefan Voss)
- Re: RAMFast help?
  - From: fmlin@netcom.com (Frank M. Lin)

Prev by Date: Re: file names.number of characters
Next by Date: Computist BBS May Close
Previous by thread: Re: RAMFast help?
Next by thread: Re: RAMFast help?
Index(es):
- Date
- Thread