Re: Grapple+ DIP settings

[sjensen@eis.calstate.edu (Steve Jensen)]

GRAPPLER + SWITCH SETTINGS
+ IS ON   - IS OFF
SW 1 controls most significant bit.  When it is on, the MSB is not sent.
When it is off, the MSB is under software control.

                              1  2  3  4
Epsons, Star Gemini           -  +  +  +
NEC 8023, C.Itoh 8510, DMP 85 -  +  +  -
Centronics 739-1              -  +  -  +
Anadex                        -  +  -  -
Okidata 82a, 83a, 92, 93, 84  -  -  +  +
   "  84 w/o Step II graphics -  -  -  +
Apple Dot Matrix              -  -  +  -
IDS printers -   use any swith settings

Orange Micro's phone is 714-779-2772.  Hope this helps.
                  

--
sjensen@eis.calstate.edu      8-()
                             - _ !    Still smokin'.