Re: Recording from IIgs to camcorder (jittery pix)

[grue@gnu.ai.mit.edu (A. Lurking)]

>
>        Sorry, the composite output is interlaced.  I've recorded
>animations on my VCR without any problems.  I connected the composite
>out to the video in of the VCR.  Try using a VCR as opposed to
>camcorder.
>
>

I guess they added a new mode... I have seen graphics recorded from the II and
the GS and all of it was non-interlaced... True the signal was close to NTSC
I mean It works... but the stuff was smearing and bleeding real fast... A local
show uses alot of IIgs graphics and they dont seem to handle being copied....

I guess I would have to have to play with one to find out to be sure but from
what I saw broadcasted wasn't... Or at least it was not quite up to spec...
but still there were nasty jumps in the signal when they did a cut alot like
the equiptment compensating for the signal being non-interlaced...

I have experimented alot with recording both... 

Is there a special mode to go interlaced? I have to assume the GS wouldn't be
automaticly in a mode like that since it can get quite flickery depending on 
the graphic itself <Thin lines Etc... Or Worse thin lines going over 100% IRE>

-Grue