trying to install and get a pseudo-disk up and running

["macdog" <bigdog128@gmail.com>]

Hello everyone.  Macdog here.  I am trying to install the pseudo-disk I
got from Alex.  I installed it in a couple of different slots on my 2E.
 I guess I am pretty ignorant on how it is supposed to work.  I first
installed it in slot 7, and tried to boot from it.  The 2E seems like
it breaks into the monitor as I get a screen of garbage, starting with
an asterick.  I then tried to install it in slot 2.  I booted, did a
control reset, and then a PR#2, and the computer just hung up.  I can
not find any instructions on his website on how to set this up.  Can
anyone give me the noob version on how to get into the pseudo-disk and
play from the images.  Also, I have a superdrive controller with a 3.5"
drive in slot 5, a 5.25" controller with two 5.25" drives in slot 6,  a
128 meg compact flash drive from Rich Dreher in slot 1,  a mouse card
with a turbo mouse trackball in slot 4, and a ramworks III card with
the rgb daughter-board, hooked up to an analog IIgs monitor..  This is
an enhanced Platinum 2E, with a stock processor running at approx 1
mhz.

Thanks for any advice/instructions.

Macdog, aka Jamie Steffens.