Re: Apple II Europlus Problem

["Harvey Staples" <harvey@staples.demon.co.uk>]

Here is an update on the problem. In the past I  removed the Language card
from the slot, but did not disconnect the lead from the ROM socket. I have
just tried it, and all apperars to be fine now, DOS 3.3 boots up fine now.
The only problem I have now is with Pro DOS.  When I try to boot up Pro DOS
I get the Realocation/ configuration error, any ideas ? looks like I had a
faulty Language card, am I correct ?

    Harvey


"Harvey Staples" <harvey@staples.demon.co.uk> wrote in message
news:bjsrcn$m8s$1$8300dec7@news.demon.co.uk...
> Hi All,
>
>              Help !!! When I try to boot DOS 3.3 with my Apple II Europlus
> the system goes in to system monitor mode. And if I try to boot Pro DOS
the
> screen comes up with ** Relocation/Configuration Error** by the way the
> machine has a Language card fitted and the lead from it goes in to a ROM
> socket with the original chip removed. Could this be anything to do with
my
> problem. If you know what the problem is  can you please contact me at my
> email address which is: harvey@staples.demon.co.uk
> The machine works normally when the controller card and drive is removed.
> ( Apple II Logo and prompt comes up )  I have tried the card and drive on
> another Apple II Europlus and all is fine boots in to DOS 3.3 or Pro DOS
> normally.
>
>     Many thanks,
>
>       Harvey
>
>