Bill Garber wrote:
No, you would need a Universal Disk Controller card.Will the A9M0106 drive work with a UDC?
As Mark mentioned it will work but there may be a problem with the drives eject button not functioning with some UDC cards. Especially Drive 2. You can of course use a paper clip but that lacked elegance. I used to just hook the eject button up to the eject motor but the down side of that is you could eject a disk inthe middle of a write. Likely the best drive to use with a UDC card is the 3.5" Laser drives as they have manual eject buttons The 3.5" UniDisk would also work with some UDC cards but not all of them. Wayne