Re: Apple drive 3,5" mod M0131

["Bill Garber" <willy46pa@comcast.net>]

> As Mark mentioned it will work but there may be a problem with the
> drives eject button not functioning with some UDC cards. Especially
> Drive 2. You can of course use a paper clip but that lacked elegance.
> I used to just hook the eject button up to the eject motor but the
> down side of that is you could eject a disk inthe middle of a write.
>
> Likely the best drive to use with a UDC card is the 3.5" Laser
> drives as they have manual eject buttons
>
> The 3.5" UniDisk would also work with some UDC cards but not all of
> them.

Thank you Wayne. I had heard about the eject problem with some
configurations. I hope it doesn't happen with the IIe which is where
I will be using it. ;-)

Bill @ GarberStreet Enterprises
http://garberstreet.netfirms.com



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.476 / Virus Database: 273 - Release Date: 4/24/03