Re: Hello fellow Apple II owners!

["Glenn Jones" <rg.jones@rogers.com>]

> At hardware stores, you can find spray cans of dye, which go into the
> plastics of the case, though KRYLON works just fine.
>
> Few tips:
>
> Obviously, it's better to remove all hardware from the case before
> preparation and paintind, or at the very least, any floppy drives.
>
> Go over every inch of the case to be painted with a fine (600 grit) sand
> paper to rough up the surface a bit for the paint. This wioll also remove
a
> bit of the yellow. Afterwards, wipe the case down with a tac clothe or
> LIGHTLY moistened rag (let dry thouroghly).
>
> Check out some of the Case Modding sites (thanks GOOGLE!) for the best
> techniques.
>

Thanks for sharing that info ...

your comments got me wondering if sanding with progressivly smoother papers
followed by a wax job would be considered "apple" polishing?

:O)

if sanding removes the yellow then that might be an alternative to painting
it offwhite....

Gonna have to get my airbrush out next ....

Glenn