Re: RAMWorks RGB Expansion and Phasor Questions

[obsbedia2@aol.com (Obsbedia2)]

<< The 2000 is 
supposed to only have two slots but there is a third on the side which 
is labeled slot 5, so I'll see if I can use 5.25 drive card in it, and 
if that works, I'll put a card in that slot too. >>


It should work.  The side port was for the expansion box, as I remember (or I
might be confusing it with the Laser).  BTW, there are actually three ports
inside, but the third one is for RGB only--again, my memory.  It's been years
since I took my Franklin 2200 apart.

Jay