Re: FAQ type question

[Joe Kohn <joko@WayTooMuchSpam!crl.com>]

Tony Ward <tward@XXXXenteract.com> wrote:
 >I'm going by memory because I don't have my manual handy, but I
 >think you need to hold down the Reset key as you power up the
 >computer. Or maybe it's Control-Reset. The printer will print
 >something like "Now testing" and your system should boot normally.
 >When the test is done, the printer will print the test results.

Thanks, Tony. The problem being...with the person I'm dealing with, I'd
rather not offer a "try this if that doesn't work" approach, as he's
confused enough already ;-)

So, if you or anyone else can provide the exact key sequence from the
Grappler's manual, I'd appreciate it. Thanks in advance.

Joe