[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New Ethernet card for the Apple II

Subject: Re: New Ethernet card for the Apple II
From: friedt@lpmo.univ-fcomte.fr
Date: 1999/09/09
Newsgroups: comp.sys.apple2
Organization: Universite de Franche-Comte

I use 8 bit ISA (IBM PC-XT) connectors when drawing card schematics for
the apple ][ (using Eagle for DOS) and then cut the ISA connector to the
right length for it to fit in the Apple ][ connector. The pin spacing is
the same one in the Apple ][ and the ISA busses.

Ether for apple][ is good news, because it means I will certainly be able 
to adapt the design to ISA and 68HC11.
Haven't looked at the schematic yet, though.
Jean-Michel FRIEDT
friedt@lpmo.univ-fcomte.fr

Follow-Ups:
- Re: New Ethernet card for the Apple II
  - From: Patrick Schaefer <pa.schaefer@fz-juelich.de>

Prev by Date: Re: And you thought Apple II users were screwed by Apple...
Next by Date: Re: File Uploads
Previous by thread: Dungeons of Despair - Wizardry
Next by thread: Re: New Ethernet card for the Apple II
Index(es):
- Date
- Thread