Re: Apple //c+ questions....

[Liam Busey <liam1@ix.netcom.com>]

InDizgize wrote:
> 
>> I have a sinking feeling your IIc+ might have been repaired 
>> incorrectly. Specifically, on the motherboard should be an oscillator >> rated at 16Mhz that controls the CPU speed which is normally 4Mhz.  >> If a technician inadvertantly replaced the oscillator with a 1Mhz 
>> oscillator, your IIc+ would run at 1Mhz!
> 
>   Makes perfect sense to me....   A quick peek revealed a 16mhz > crystal though..   Damn..   I'll try timing a good sized FOR..NEXT > loop and see if that gives me any different results.

Hmmm, in another message you stated that your IIc+ has a 6502A. IIRC, a
6502A is a vanilla 6502 rated at 2MHz. Shouldn't a IIc+ have a 65c02
rated at 4 MHz?

Liam Busey