Re: Disk II converter for IIc, compatable with IIgs or IIc+?

[CUTjefbla@bconnex.net (Jeff Blakeney)]

On Mon, 01 Mar 1999 10:59:49 -0600, eeastman1@unl.edu wrote:

>My question is this, can anyone know if this will work on the IIgs or
>the IIc+ computer without harm?  Again this is a pin converter device
>that allows one to use a single DiskII 5.25" drive on the IIc drive (Db
>19) port.

It should work just fine on the //c+ and IIgs as well as the //e (with
the Disk ][ interface that has the 19 pin connector) in addition to
the Laser 128 and //c.  The SmartPort pinout is the same on all these
machines.

=== To ensure I see a reply please also e-mail me but remember to:
    CUT the obvious from my e-mail address to e-mail me
    Jeff Blakeney - Dean of the Apple II University on Delphi
*** HyperCard IIgs course now in session in the A2Pro forum on Delphi