Re: GS/OS booting problem

[dempson@actrix.gen.nz (David Empson)]

<pollycb@dorsai.org> wrote:

> I had to erase the first partition of my Focus hard drive card and
> reinstall the system software. I added everything on the System 6.1 disks
> and everything on the Quality Computer Bonus Disks.  Somehow in all of
> this I gave the impression that AppleTalk is connected. 
> 
> Shortly into the booting I get the following message, "The selected
> AppleTalk connection could not be found. Be sure it is installed and the
> slot settings in the Control Panel are correct."

Get rid of "SCC.MANAGER" (in Drivers).  This doesn't do anything apart
from arbitrate serial ports for use by the AppleTalk protocol stack and
isn't needed if you aren't using AppleTalk.

(Don't confuse this with SCSI.MANAGER, which is the low-level driver for
Apple SCSI cards.)

There is another error messages generated later in the boot sequence by
the AppleShare FST, but I assume you spotted and removed that already.

-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand