Re: ImageWriter I technical help???

[Steve Jensen <sjensen@ns.qnis.net>]

In comp.sys.apple2 Tom Prins <tom_prins@wirehub.net> wrote:
: I think you 'd check the dipswitches. the right positions are in the
: manual.

 
Try these switch settings for the IW-I:
 
SW-1
 
   1-1     Open
   1-2     Open
   1-3     Open   (American)
   1-4     Open    (PL 66 lines)
   1-5     Closed  (ignores 8th data bit, allowing reception of high
           ASCII)
   1-6     Closed  Elite
   1-7     Open     Elite
   1-8     Open     No LF after CR
 
SW-2
 
   2-1      Closed
   2-2      Closed     (9600 baud)
   2-3      Open        DTR
   2-4      not used

-- 
                         ____________________
                        |                    |
                        | sjensen@qnis.net   |
                        |____________________|