Re: Can't configure my RamFast SCSI card

[spec@vax2.concordia.ca (Mitchell Spector)]

In article nathan@visi.com (Nathan Mates) writes...

>   Have you installed the RamFAST's GS/OS driver to the boot disk?
>There's an option to do so from within the Ramfast's setup program, or
>if the Ramfast's ROMDisk is active, you can manually copy the driver
>file to */system/drivers (*=boot volume). Reboot, and it should
>recognize everything under GS/OS.

    Another bit of important advice, if your using a RamFAST SCSI
controller, Apple's own SCSI drivers should be removed from your
*/System/Drivers folder (i.e. SCSI.MANAGER, SCSIHD.DRIVER). These
are not used by the RamFAST and may potentially cause problems.

Mitchell Spector
spec@vax2.concordia.ca