[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Y-cable to my SCSI card?
- Subject: Re: Y-cable to my SCSI card?
- From: ntt <ntt@dove.mtx.net.au>
- Date: 1997/01/27
- Newsgroups: comp.sys.apple2
- Organization: Microtronics Information Systems
- References: <5c20nn$v2d@nntp.hut.fi> <5c2u1f$e8d@scapa.cs.ualberta.ca>
Devin Reade wrote:
> If you are having multiple devices on your bus, then ensure they're
> all daisy-chained together. You cannot (reliably) have a T on your
> bus unless it's less than 10cm (about 4") long. Don't forget the
> termination.
Not at all true. (about the T-cable) Anyway, this is unlikely to be an
issue for someone making a cable within their GS case. The only issue of
importance is correctly converting the 25-way output from the card(s) to
the 50 pin connector on the drive. This information is adequately
displayed on page 17ff of the Apple II High-Speed SCSI Card Reference.
cheers
ntt@dove