[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CP/M on //e?

Subject: Re: CP/M on //e?
From: ds_spenc@alcor.concordia.ca (Doug Spence)
Date: 1996/10/17
Newsgroups: comp.sys.apple2
Organization: Concordia University, Montreal, Canada
References: <53aeoe$bsf@newsflash.concordia.ca> <53c2lj$2066@news.gate.net> <53l300$552@newsflash.concordia.ca> <19961013011020804703@dempson.actrix.gen.nz>

David Empson (dempson@actrix.gen.nz) wrote:

: There are some differences in the timing of DMA (direct memory access)
: transfers : a card which uses DMA must set up the address a little
: earlier on a IIe than on a ][.  Most Z80 cards make use of DMA, so this
: is the area which will cause the most trouble.

OK, thanks for the info.  It looks like I need to find a different Z80 
card for the //e.  I do have a dedicated CP/M box, but it's still a 
bummer that the card doesn't work.

: -- 
: David Empson
: dempson@actrix.gen.nz
: Snail Mail: P.O. Box 27-103, Wellington, New Zealand

Doug Spence
DS_SPENC@alcor.concordia.ca

References:
- CP/M on //e?
  - From: ds_spenc@alcor.concordia.ca (Doug Spence)
- Re: CP/M on //e?
  - From: louiss@gate.net (Louis Schulman)
- Re: CP/M on //e?
  - From: ds_spenc@alcor.concordia.ca (Doug Spence)
- Re: CP/M on //e?
  - From: dempson@actrix.gen.nz (David Empson)

Prev by Date: Re: CP/M on //e?
Next by Date: Re: 6809 Coprocessor (was Re: CP/M on //e?)
Previous by thread: Re: CP/M on //e?
Next by thread: 6809 Coprocessor (was Re: CP/M on //e?)
Index(es):
- Date
- Thread