[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CD-Rom Help



In article <DtF1q0.6qF.0.sheppard@torfree.net>, be773@torfree.net (Per
Frajkor) writes:

>
>	I've installed the media controller package (everything). I 
>placed the ramfast SCSI2 CD driver in the media control folder and 
>selected the game port in the media control NDA. My ramfast does 
>recognize that the CD is now on the SCSI chain.
>
>	Needless to say nothing works. I have not purchased discquest
(yet)
>as I was told that I didn't need it if all I wanted to do was play audio 
>CD's. (That's all I want at this point).
>
>	The media controller always issues error messages to me no matter 
>what port i try.

     To get going, you need ...

1- The RAMFast CD ROM driver file in Media.Control folder which is in
SYSTEM/DRIVERS

2- The MediaControl control panel file in SYSTEM/CDEVS

3- The Media.Control.DA desk accessory file in SYSTEM/DESK.ACCS.

4- The Slot in which RAMFast is located must be set to "Your Card"

5- Stereo headphones, speakers, or hi-fi cables need to be plugged into
the CD ROM drive. Most drives have a mini-stereo socket in the front. The
plug for your headphones, etc. must be a stereo plug.

     Once the above items are checked, Shut Down your IIgs. Turn it OFF.
Turn OFF the CD ROM drive. Wait 10-20 seconds. Turn ON the CD ROM Drive.
Wait a few seconds and turn ON your IIgs.

     Reboot the system. Click on Control Panels in the Apple Menu. Select
the Media Ctrl control panel. My system uses a RAMFast and a CD ROM drive
from Alltech, too. I have "1" for Media Channel, "RF.NEC" (the name of the
driver) for Media Device, and "GAME PORT" for Port. After entering your
settings, close the panel. This will save your setup in a file named
"Media.Setup" in the same Media.Control folder which contains your driver.

     From the Apple Menu click on Media Controller to show the CD ROM
player. Click Channel 1. (When the correct channel is clicked, the name of
your CD ROM driver sould show in the player display.)  Insert a CD. Click
Play and adjust the volume on the drive.


Rubywand