Re: RamFAST crashing

[sirius@spirit.com.au (Michael Hickey)]

In article <4p94e7$ebi@zap.io.org>, crownmi@zap.io.org (Myles Fudge) wrote:

> This question goes out to those familiar with RamFAST and
> accelerator hardware:  Each time I boot my GS about 1/2 way
> through the boot  process the system crashes to the monitor.  I
> always just press  control-reset and the boot process repeats
> itself, this time  successfully.  This is always how my boot
> process occurs.  What gives?
> I believe that it is related to the system attempting to
> recognize my Zip drive during the boot process.  The system
> boots from the hard drive  connected to an Apple SCSI card.
> During the boot process, my Zip drive  which is connected to my
> RamFAST card is polled.  There is always a  working disk in it,
> and it always works after I get through the crash and reboot.
> Do I need to adjust the DIP switch settings on the accelerator?
>  
> Thanks,
> 
> -- 
> Myles
> crownmi@io.org

Can you Boot into the RamFAST controller (boot holding down 0 key)?
Tell us...
SCSI IDs of all your SCSI equipment, 
ROM and version of RamFAST
and maybe...
Model, speed and cache of accelerator 
Current DIP settings on accelerator
Model and System of computer 
Shift-boot attempts etc,etc, etc...

-- 
                 Michael Hickey, Canberra, Australia
         |
       --x--     sirius@spirit.com.au
         |