Re: Decreased stability with Second Sight?

[gachot@carros.enet.dec.com ()]

In article <42o22v$9qt@news-2.csn.net>, bazyar@hypermall.com (Jawaid Bazyar) writes:
|>gachot@carros.enet.dec.com wrote:
|>
|>: |>  I'm not sure what you mean like "flickering"; I'd check for any 
|>: |>magnetic interference on the cable; try _not_ mounting the SS cable
|>: |>to the back of the GS (run the computer with the cable hanging in the 
|>: |>air).
|>
|>: 	This manipulation didn't help. 
|>: 	Somebody told me: One thing that cleaned up my SVGA output 
|>: 	A LOT was to GROUND the svga connector casing to the gs case 
|>: 	or some other ground.. 
|>: 	But for me, I still have the problem.
|>
|>: 	I notice that the 'TWGS green light' is blinking at the
|>: 	same cadence as the monitor is flickering !!!. There is
|>: 	perhaps interferences between the TWGS and the SS ?.
|>
|>  Well, that's very strange.. what happens if you remove the TWGS,
|>or slow it down? How close is the TWGS to the Second Sight (what
|>slots are they in?)

	Without the TWGS, I get the same result. So I think that
	the Electric line is the one !!!!..

>>I think that I found the problem, as I enter in a previous
>>note. I'm living not far from an Eletric-Line. My IIgs is
>>installed at the first floor of our house, and is oriented
>>to this Line.


		-Erik.