Re: ProTerm 1.7 and 14.4 modems?

[mpearce@crl.com (Matthew Pearce)]

Ron Kneusel (rkneusel@post.its.mcw.edu) wrote:

: I borrowed a 14.4 modem and hooked it up to my
: trusty IIe. Ran ProTerm 1.7 and set the baud
: to 19200.  I called a place I know connects at
: 14.4 and I connected at 2400.  So I lowered the
: baud rate in ProTerm to 9600 and tried again,
: still connected at 2400.

Are you sure that both modems are compatible at 14.4?  If one uses the 
HFS standard & the other one uses the 'V dot' standard they will not 
connect at 14.4 regardless of the software.

M.P.

-- 
"I will not buy this tobacconist.  It is scratched."