Re: Ramfast DIP settings

[bazyar@netcom.com (Jawaid Bazyar)]

gtolar@blkbox.com (Glynne Tolar) writes:

>Fretz, David (st3b1@jetson.uh.edu) wrote:
>: In article <3nsa8l$nu1@mark.ucdavis.edu>, eddy@cs.ucdavis.edu (Alexander H Eddy) writes...
>: >I didn't see it in the FAQ, so would someone
>: >please post the RamFAST DIP settings? My manual
>: >is incorrect.

>: Ramfast  DIP Switches as of 1990

>:                         Off                     On
>: SW1 Term Power          No                      Yes
>: SW2 Rom Select          IIGS                    IIe
>: SW3 Machine Type        IIGS                    IIe
>: SW4 DMA                 Yes                     No
>: SW5 GS ROM Type         ROM 01                  ROM 3
>: SW6 ROM Disk Disable    ROM Disk                No Romdisk
>: SW7 Drive Search Time   30 Seconds              3 Seconds
>: SW8 Reserved

>Note: As of (I think) ROM 3.00>  SW2-8 are no longer used, all done in 
>software now.

  SW2 is definitely still active - it's the IIe enable switch.

-- 
 Jawaid Bazyar              |   Like UNIX? Like your Apple IIGS? Then ask
 Procyon, Inc.              |   me about GNO/ME for the Apple IIgs!   
 bazyar@netcom.com          |   P.O Box 620334    (Sequential: 303-666-4549)
 --Apple II Forever!--      |   Littleton, CO 80162-0334   (303) 781-3273