GS KEYBOARD: How to solder loose ADB sockets

[sebugg@presby.edu (Stephen Buggie)]

The two ADB sockets on my IIGS keyboard are intermittently loose.
I have to wiggle the cords to ensure contact.

I recall reading on this net that it is possible to solder the 
connectors at the ADB sockets.  PLEASE GIVE DETAILS ON THE SOLDERING
PROCEDURE.  Will any springs or gismos fly out if I open the IIGS
keyboard?   Any complications?   Is it obvious what must be soldered
when you look at it?   Do you leave the keyboard in the plastic casing
or do you lift it all away from the casing?

Advice will be appreciated!      sebugg        sebugg@presby.edu



 **=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=**
 ** Stephen Buggie  Psych Dept  Presbyterian College   Clinton SC 29325 **
 ** sebugg@presby.edu                 voice: (803) 833-8337 or 833-1632 **
 **       Douglas DC-3.....Volkswagen Beetle.....Apple ][ forever       **
 **=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=**


.