Re: sound sampling with IIgs

[dempson@atlantis.actrix.gen.nz (David Empson)]

In article <25193VDIJIYDNVCFIDI@wbb.com>,  <mcfudge@wbb.com> wrote:
> 
> I recently acquired my first IIgs, after using the II+,IIe, and //c for
> several years.  Can sound be sampled with my gs without the use of a
> sound card?

No.  You need at least a little analog circuitry connected to the
audio input pin, and probably amplification/impedance balancing.  The
smallest "card" I've seen was included with HyperStudio (from Roger
Wagner Publishing) along with a microphone.  It wasn't a "card", as
such - it was a small circuit board (about 1.5" square) that clamped
into the back panel of the IIgs, with wires running to the internal
sound connector and to the fan power connector.  They may still have
them available, but I don't know if you can buy them without buying
HyperStudio.

I've lent mine to a friend, so I can't look at it to see what is on
it.  I have a SoundMeister card in here at the moment.
-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand