Re: Cheap LCD UK with Scart that works...

[Drew <goggledrew@gmail.com>]

On 16 Oct, 22:49, Steven Hirsch <snhir...@gmail.com> wrote:
> Drew wrote:
> > The default cable has Pin3 on the GS end connected to Pin20 on the
> > Scart end. I also tried connecting to PIN12 on the GS to Pin20 on the
> > Scart. I had to use Pin12 on the Samsung T200HD to get the picture to
> > sync properly...if i didn't it would shift every 20 seconds or so
> > slightly then become stable. Using Pin12 it would only shift once when
> > switching resolution.
>
> Results seem to vary all over the place on this issue!  My Highway scan
> converter was happier getting sync from the actual composite sync output of
> the GS (pin 3) while others are having better success with using composite
> video (pin 12).  Are you saying you connected _both_ of them to SCART pin 20
> at the same time?  Doesn't sound like a wise idea to have the drivers fighting
> each other like that.
>
> IIRC, Roger Johnstone's cables come stock with pin 3 --> pin 20.
>
> Steve

Hi,

No sorry if it wasn't clear i didn't do both lol. I have two scart
cables one with pin3-20 and the other pin12-20.

Regards
Andrew