[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: TransWarp Hangups

Subject: Re: TransWarp Hangups
From: scraft@trident.usacs.rutgers.edu (Steve Craft)
Date: 5 Nov 93 03:46:47 GMT
Newsgroups: comp.sys.apple2
Organization: Rutgers Univ., New Brunswick, N.J.
References: <2b68r3$f68@TAMUTS.TAMU.EDU> <1993Nov3.071957.12367@news.unomaha.edu> <2b9a4c$b6s@zip.eecs.umich.edu>

>>I had that problem when I installed a CV Tech GS Memory board with
>my 1 meg
>>Apple board piggybacked.  Seems that It only did it when I put the
>lid back
>>on my GS.  Turns out the RAM card was touching the metal on the lid
>and
>>shorting out.
>
>    Your CV Tech RAM card *should've*  already included a cardboard
>insert to prevent just that.  (Well, at least mine did...)

Hmm.  My Vulcan-20 (may it burn in Hell) came with an anti-static card
to stick in between the Vulcan controller card and any other card.  That's
why the Vulcan cost just under $1 trillion, that anti-static card is
specially engineered...

"Shut up already, damn." ||  scraft@gum.rutgers.edu            ||
       --Prince          ||  Call SJAUG AppleLine 609-424-1382 ||

References:
- TransWarp Hangups
  - From: jdb8042@TAMUTS.TAMU.EDU (John Donald Baker)
- Re: TransWarp Hangups
  - From: wseaton@cwis.unomaha.edu (William Seaton)
- Re: TransWarp Hangups
  - From: grover@emunix.emich.edu (Grover Thomas)

Prev by Date: Re: MAKE.MONEY.FAST
Next by Date: Re: Disk II drives spin, but...
Previous by thread: Re: TransWarp Hangups
Next by thread: Re: TransWarp Hangups
Index(es):
- Date
- Thread