[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IC Test Card
On Nov 25, 5:01 am, "Bill Garber" <willy4...@comcast.net> wrote:
>
> Ok, here it is. Click on ZOOM, and scroll down, the
> test socket shows under the card. It shows 14, 16,
> 18, and 20 pin are inserted from the bottom-up.
>
> http://www.hackzapple.com/ORG1/M2/UTILITY/TESTIC2.HTM
>
> Bill Garber from GS-Electronicshttp://www.garberstreet.com
Thanks, but that wasn't what I was referring to. The test socket I
have is marked as to chip insertion. Also, the software has a diagram.
The thing that is not marked or documented well is which way the
ribbon cable plugs in. Pin 1 of the connector on the card is marked,
but the connector to the test socket is not. The correct orientation
of the ribbon cable is not mentioned in the manual either.